Java example source code file (Finishings.java)

This example Java source code file (Finishings.java) is included in the alvinalexander.com "Java Source Code Warehouse" project. The intent of this project is to help you "Learn Java by Example" ^TM.

Learn more about this Java project at its project page.

Java - Java tags/keywords

edge_stitch, edge_stitch_left, enumsyntax, finishings, none, saddle_stitch, staple_bottom_left, staple_dual_bottom, staple_dual_left, staple_dual_right, staple_dual_top, staple_top_left, staple_top_right, string

The Finishings.java Java example source code

/*
 * Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */
package javax.print.attribute.standard;

import javax.print.attribute.Attribute;
import javax.print.attribute.EnumSyntax;
import javax.print.attribute.DocAttribute;
import javax.print.attribute.PrintRequestAttribute;
import javax.print.attribute.PrintJobAttribute;

/**
 * Class Finishings is a printing attribute class, an enumeration, that
 * identifies whether the printer applies a finishing operation of some kind
 * of binding to each copy of each printed document in the job. For multidoc
 * print jobs (jobs with multiple documents), the
 * {@link MultipleDocumentHandling
 * MultipleDocumentHandling} attribute determines what constitutes a "copy"
 * for purposes of finishing.
 * <P>
 * Standard Finishings values are:
 * <TABLE BORDER=0 CELLPADDING=0 CELLSPACING=0 WIDTH=100% SUMMARY="layout">
 * <TR>
 * <TD STYLE="WIDTH:10%">
 *  
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #NONE NONE}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE STAPLE}
 * </TD>
 * <TD STYLE="WIDTH:36%">
 * {@link #EDGE_STITCH EDGE_STITCH}
 * </TD>
 * </TR>
 * <TR>
 * <TD>
 *  
 * </TD>
 * <TD>
 * {@link #BIND BIND}
 * </TD>
 * <TD>
 * {@link #SADDLE_STITCH SADDLE_STITCH}
 * </TD>
 * <TD>
 * {@link #COVER COVER}
 * </TD>
 * <TD>
 *  
 * </TD>
 * </TR>
 * </TABLE>
 * <P>
 * The following Finishings values are more specific; they indicate a
 * corner or an edge as if the document were a portrait document:
 * <TABLE BORDER=0 CELLPADDING=0 CELLSPACING=0 WIDTH=100% SUMMARY="layout">
 * <TR>
 * <TD STYLE="WIDTH:10%">
 *  
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_TOP_LEFT STAPLE_TOP_LEFT}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #EDGE_STITCH_LEFT EDGE_STITCH_LEFT}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_DUAL_LEFT STAPLE_DUAL_LEFT}
 * </TD>
 * <TD STYLE="WIDTH:9%">
 *  
 * </TD>
 * </TR>
 * <TR>
 * <TD STYLE="WIDTH:10%">
 *  
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_BOTTOM_LEFT STAPLE_BOTTOM_LEFT}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #EDGE_STITCH_TOP EDGE_STITCH_TOP}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_DUAL_TOP STAPLE_DUAL_TOP}
 * </TD>
 * <TD STYLE="WIDTH:9%">
 *  
 * </TD>
 * </TR>
 * <TR>
 * <TD STYLE="WIDTH:10%">
 *  
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_TOP_RIGHT STAPLE_TOP_RIGHT}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #EDGE_STITCH_RIGHT EDGE_STITCH_RIGHT}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_DUAL_RIGHT STAPLE_DUAL_RIGHT}
 * </TD>
 * <TD STYLE="WIDTH:9%">
 *  
 * </TD>
 * </TR>
 * <TR>
 * <TD STYLE="WIDTH:10%">
 *  
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_BOTTOM_RIGHT STAPLE_BOTTOM_RIGHT}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #EDGE_STITCH_BOTTOM EDGE_STITCH_BOTTOM}
 * </TD>
 * <TD STYLE="WIDTH:27%">
 * {@link #STAPLE_DUAL_BOTTOM STAPLE_DUAL_BOTTOM}
 * </TD>
 * <TD STYLE="WIDTH:9%">
 *  
 * </TD>
 * </TR>
 * </TABLE>
 * <P>
 * The STAPLE_<I>XXX values are specified with respect to the
 * document as if the document were a portrait document. If the document is
 * actually a landscape or a reverse-landscape document, the client supplies the
 * appropriate transformed value. For example, to position a staple in the upper
 * left hand corner of a landscape document when held for reading, the client
 * supplies the STAPLE_BOTTOM_LEFT value (since landscape is
 * defined as a +90 degree rotation from portrait, i.e., anti-clockwise). On the
 * other hand, to position a staple in the upper left hand corner of a
 * reverse-landscape document when held for reading, the client supplies the
 * STAPLE_TOP_RIGHT value (since reverse-landscape is defined as a
 * -90 degree rotation from portrait, i.e., clockwise).
 * <P>
 * The angle (vertical, horizontal, angled) of each staple with respect to the
 * document depends on the implementation which may in turn depend on the value
 * of the attribute.
 * <P>
 * The effect of a Finishings attribute on a multidoc print job (a job
 * with multiple documents) depends on whether all the docs have the same
 * binding specified or whether different docs have different bindings
 * specified, and on the (perhaps defaulted) value of the {@link
 * MultipleDocumentHandling MultipleDocumentHandling} attribute.
 * <UL>
 * <LI>
 * If all the docs have the same binding specified, then any value of {@link
 * MultipleDocumentHandling MultipleDocumentHandling} makes sense, and the
 * printer's processing depends on the {@link MultipleDocumentHandling
 * MultipleDocumentHandling} value:
 * <UL>
 * <LI>
 * SINGLE_DOCUMENT -- All the input docs will be bound together as one output
 * document with the specified binding.
 * <P>
 * <LI>
 * SINGLE_DOCUMENT_NEW_SHEET -- All the input docs will be bound together as one
 * output document with the specified binding, and the first impression of each
 * input doc will always start on a new media sheet.
 * <P>
 * <LI>
 * SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will be bound
 * separately with the specified binding.
 * <P>
 * <LI>
 * SEPARATE_DOCUMENTS_COLLATED_COPIES -- Each input doc will be bound separately
 * with the specified binding.
 * </UL>
 * <P>
 * <LI>
 * If different docs have different bindings specified, then only two values of
 * {@link MultipleDocumentHandling MultipleDocumentHandling} make sense, and the
 * printer reports an error when the job is submitted if any other value is
 * specified:
 * <UL>
 * <LI>
 * SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- Each input doc will be bound
 * separately with its own specified binding.
 * <P>
 * <LI>
 * SEPARATE_DOCUMENTS_COLLATED_COPIES -- Each input doc will be bound separately
 * with its own specified binding.
 * </UL>
 * </UL>
 * <P>
 * <B>IPP Compatibility: Class Finishings encapsulates some of the
 * IPP enum values that can be included in an IPP "finishings" attribute, which
 * is a set of enums. The category name returned by
 * <CODE>getName() is the IPP attribute name.  The enumeration's
 * integer value is the IPP enum value.  The <code>toString() method
 * returns the IPP string representation of the attribute value.
 * In IPP Finishings is a multi-value attribute, this API currently allows
 * only one binding to be specified.
 *
 * @author  Alan Kaminsky
 */
public class Finishings extends EnumSyntax
    implements DocAttribute, PrintRequestAttribute, PrintJobAttribute {

    private static final long serialVersionUID = -627840419548391754L;

    /**
     * Perform no binding.
     */
    public static final Finishings NONE = new Finishings(3);

    /**
     * Bind the document(s) with one or more staples. The exact number and
     * placement of the staples is site-defined.
     */
    public static final Finishings STAPLE = new Finishings(4);

    /**
     * This value is specified when it is desired to select a non-printed (or
     * pre-printed) cover for the document. This does not supplant the
     * specification of a printed cover (on cover stock medium) by the
     * document  itself.
     */
    public static final Finishings COVER = new Finishings(6);

    /**
     * This value indicates that a binding is to be applied to the document;
     * the type and placement of the binding is site-defined.
     */
    public static final Finishings BIND = new Finishings(7);

    /**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * middle fold. The exact number and placement of the staples and the
     * middle fold is implementation- and/or site-defined.
     */
    public static final Finishings SADDLE_STITCH =
        new Finishings(8);

    /**
     * Bind the document(s) with one or more staples (wire stitches) along one
     * edge. The exact number and placement of the staples is implementation-
     * and/or site- defined.
     */
    public static final Finishings EDGE_STITCH =
        new Finishings(9);

    /**
     * Bind the document(s) with one or more staples in the top left corner.
     */
    public static final Finishings STAPLE_TOP_LEFT =
        new Finishings(20);

    /**
     * Bind the document(s) with one or more staples in the bottom left
     * corner.
     */
    public static final Finishings STAPLE_BOTTOM_LEFT =
        new Finishings(21);

    /**
     * Bind the document(s) with one or more staples in the top right corner.
     */
    public static final Finishings STAPLE_TOP_RIGHT =
        new Finishings(22);

    /**
     * Bind the document(s) with one or more staples in the bottom right
     * corner.
     */
    public static final Finishings STAPLE_BOTTOM_RIGHT =
        new Finishings(23);

    /**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * left edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_LEFT =
        new Finishings(24);

    /**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * top edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_TOP =
        new Finishings(25);

    /**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * right edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_RIGHT =
        new Finishings(26);

    /**
     * Bind the document(s) with one or more staples (wire stitches) along the
     * bottom edge. The exact number and placement of the staples is
     * implementation- and/or site-defined.
     */
    public static final Finishings EDGE_STITCH_BOTTOM =
        new Finishings(27);

    /**
     * Bind the document(s) with two staples (wire stitches) along the left
     * edge assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_LEFT =
        new Finishings(28);

    /**
     * Bind the document(s) with two staples (wire stitches) along the top
     * edge assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_TOP =
        new Finishings(29);

    /**
     * Bind the document(s) with two staples (wire stitches) along the right
     * edge assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_RIGHT =
        new Finishings(30);

    /**
     * Bind the document(s) with two staples (wire stitches) along the bottom
     * edge assuming a portrait document (see above).
     */
    public static final Finishings STAPLE_DUAL_BOTTOM =
        new Finishings(31);

    /**
     * Construct a new finishings binding enumeration value with the given
     * integer value.
     *
     * @param  value  Integer value.
     */
    protected Finishings(int value) {
        super(value);
    }

    private static final String[] myStringTable =
                {"none",
                 "staple",
                 null,
                 "cover",
                 "bind",
                 "saddle-stitch",
                 "edge-stitch",
                 null, // The next ten enum values are reserved.
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 "staple-top-left",
                 "staple-bottom-left",
                 "staple-top-right",
                 "staple-bottom-right",
                 "edge-stitch-left",
                 "edge-stitch-top",
                 "edge-stitch-right",
                 "edge-stitch-bottom",
                 "staple-dual-left",
                 "staple-dual-top",
                 "staple-dual-right",
                 "staple-dual-bottom"
                };

    private static final Finishings[] myEnumValueTable =
                {NONE,
                 STAPLE,
                 null,
                 COVER,
                 BIND,
                 SADDLE_STITCH,
                 EDGE_STITCH,
                 null, // The next ten enum values are reserved.
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 null,
                 STAPLE_TOP_LEFT,
                 STAPLE_BOTTOM_LEFT,
                 STAPLE_TOP_RIGHT,
                 STAPLE_BOTTOM_RIGHT,
                 EDGE_STITCH_LEFT,
                 EDGE_STITCH_TOP,
                 EDGE_STITCH_RIGHT,
                 EDGE_STITCH_BOTTOM,
                 STAPLE_DUAL_LEFT,
                 STAPLE_DUAL_TOP,
                 STAPLE_DUAL_RIGHT,
                 STAPLE_DUAL_BOTTOM
                };

    /**
     * Returns the string table for class Finishings.
     */
    protected String[] getStringTable() {
        return (String[])myStringTable.clone();
    }

    /**
     * Returns the enumeration value table for class Finishings.
     */
    protected EnumSyntax[] getEnumValueTable() {
        return (EnumSyntax[])myEnumValueTable.clone();
    }

    /**
     * Returns the lowest integer value used by class Finishings.
     */
    protected int getOffset() {
        return 3;
    }

    /**
     * Get the printing attribute class which is to be used as the "category"
     * for this printing attribute value.
     * <P>
     * For class Finishings and any vendor-defined subclasses, the
     * category is class Finishings itself.
     *
     * @return  Printing attribute class (category), an instance of class
     *          {@link java.lang.Class java.lang.Class}.
     */
    public final Class<? extends Attribute> getCategory() {
        return Finishings.class;
    }

    /**
     * Get the name of the category of which this attribute value is an
     * instance.
     * <P>
     * For class Finishings and any vendor-defined subclasses, the
     * category name is <CODE>"finishings".
     *
     * @return  Attribute category name.
     */
    public final String getName() {
        return "finishings";
    }

}